Bodyguard T270 Manuel d'instructions télécharger pdf (Page 7)

TREADMILLS – OWNER’S MANUAL

ELECTRICAL INFORMATION

CAUTION – This equipment is intended to be plugged into a properly grounded and polarized

3-pronged AC outlet. See Grounding Instructions on page 8. The third grounding prong must never be

removed. Do not use an extension cord or an adaptor plug. If an extension cord has to be used, it

must be the same gauge and type of cord that equips the treadmill. Contact a licensed electrician to

replace the outlet with a properly grounded outlet.

WARNING – To prevent the risk of fire or electrical shock, do not expose this machine to rain

or moisture. Do not install the machine outdoors or near swimming pools, sauna rooms or high

humidity environments. Refer servicing to qualified Bodyguard

Service personnel only. If you have any

questions about the assembly, proper use or repair of your treadmill, please contact your local

Bodyguard Fitness Dealer. All necessary adjustments or repairs during the warranty period must be

made by an Authorized Bodyguard Fitness Dealer.

IMPORTANT NOTICE – This treadmill should be plugged into a dedicated 15 amps

circuit in order to avoid functional problems. For more information, please contact our Customer

Service Department at: 1 888 407-3784.

USING THE EMERGENCY STOP SYSTEM

This treadmill is equipped with an emergency stop system comprising of a safety clip and a magnetic

key. The clip is tied to a cord that when pulled will remove the magnetic key, opening a switch inside

the console. This will stop the running belt and put the console into a PAUSE mode for the

countdown duration displayed on screen.

Before starting your workout, test that this system works correctly by following the steps below.

1. Attach the safety clip to your clothing and make sure the magnetic key is located in its correct

position on the console. NOTE: If the magnetic key is not positioned correctly, the message ''PUT

SAFETY KEY'' will appear on screen.

2. Place your feet on the footrests and press the JUSTGO button to start the treadmill. The belt will

start moving slowly at 0.5 mph (0.8 km/h). IMPORTANT: DO NOT increase the speed for this test.

3. Step onto the belt and begin walking making sure you are located in the middle of the workout

area.

4. Slow your walking pace and let the belt take you to the back of the treadmill belt area. As you

approach the rear of the treadmill belt area the safety clip cord will pull and remove the magnetic

safety key from its location on the console causing the running belt to stop.

5. If you feel the distance is too long before the running belts stops, you may reduce the length of the

cord. IMPORTANT: For your safety, DO NOT lengthen the cord under any circumstances.

Always use the safety clip when exercising on the treadmill. If the magnetic key is removed while

you are exercising, the running belt will come to a stop and the treadmill will enter into a PAUSE

mode. You will need to place back the magnetic key into its correct position and press the

JUSTGO button to restart the treadmill.

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Pas de commentaire

Bodyguard T270 Manuel d'instructions Page 7