Bodyguard T270 Manuel d'instructions télécharger pdf (Page 25)

TREADMILLS – OWNER’S MANUAL

2.10. SPEED LIMITS OPTION

The Speed Limits option on the T240S-T280S-T520S allows users to set a maximum speed limit on the treadmill.

To modify the maximum speed setting, enter the SETTINGS Menu (see section 2.1).

1. S1 will be displayed on screen. Scroll to S3 using the INCREASE/DECREASE SPEED keys. Press JustGo

2. The current max speed value will be displayed in the top right LED (Speed) window. Be sure to know if the value is in

Metric (km/hr) or Imperial (mph) format. This can be verified by following the instructions in Section 2.3.

3. Using the INCREASE/DECREASE SPEED keys, select the desired max speed value. Press the JustGo

key to confirm.

The Speed Limits option on the T260P-T260F-T280P-T460XC-T520P-T560X allows users to set minimum and maximum

speed limits on the treadmill. To select this option, enter the SETTINGS Menu (see section 2.1).

1. Select the SPEED LIMITS option and press the JustGo

key to accept.

2. Select MINIMUM or MAXIMUM using the INCREASE/DECREASE SPEED keys. Press the JustGo

key to accept.

3. To modify the value chosen, press the INCREASE/DECREASE SPEED keys. Press the JustGo

key to validate the new

values (the new values will not be saved if the JustGo

key is not pressed).

NOTE – The highest minimum speed setting available is 1.9 (km/h or mph) and the lowest maximum speed selection available

is 2.0 (km/h or mph)

2.11. CUSTOM PROGRAM / LEARN PROGRAM

Bodyguard machines allow users to create their own preprogrammed workouts. This is particularly useful if a user wishes to

design their workout programs. This also allows personal trainers to customize individualized programs for clients.

NOTE – The name “Learn Program” is used on the T270 treadmill while “Custom Program” is used for the T260P-T260F-

T280P-T460XC-T520P-T560X.

To create a Custom Program / Learn Program, enter the SETTINGS Menu (see section 2.1) and scroll through until

CUSTOM PROGRAMS appears on screen. Press the JustGo

key.

1. When the screen opens, the prompt word “NEW” invites the user to create a new program. Press the JustGo

key.

2. The user will then be prompted to enter a speed level for Segment No.1. The speed for this segment may be varied using

the INCREASE/DECREASE SPEED keys. Speed variations will appear in the upper right-hand side of the screen, as well

as graphically at the center of the screen. Once the speed has been adjusted, press the JustGo

key to accept.

3. Users will then be prompted to enter an incline level for Segment No.1. Vary the incline level using the

INCREASE/DECREASE INCLINE keys. Incline variations will appear in the upper left-hand side of the screen as well as

graphically at the center of the screen. Once the incline has been adjusted, press the JustGo

key to accept. The user

may then enter values for the next segment.

NOTE - For the T260P-T260F-T280P-T460XC-T520P-T560X, the user can backspace to correct a pre-entered value by

pressing the iTek key.

4. Repeat this procedure until the entire profile (20 segments) is completed. The new program will be saved under the name

“CUSTOM. X”, X being the next available storage location. If all the locations are full, the user will have to delete another

Custom / Learn Program to make space or modify an existing program to meet the specific needs, following the above

procedure.

5. Once completed the new program will display under the location name (e.g. Custom 4). To select a stored program in the

CUSTOM / LEARN PROGRAM option, select Custom program / Learn program from the programs available, and then

select the desired custom program.

NOTE – You can create up to four (4) Learn / Custom Programs on the T270 treadmill and up to eight (8) on the T260P-

T260F-T280P-T460XC-T520P-T560X.

NOTE - On the T260P-T260F-T280P-T460XC-T520P-T560X, users can DELETE any CUSTOM program by entering the

SETTINGS menu, scrolling through until CUSTOM PROGRAM appears on screen. Press JustGo

, pressing the SPEED

DECREASE key repeatedly until DELETE appears on the screen (If Delete does not appear on screen there are no stored

Custom Programs). Then choose the CUSTOM program you wish to delete and press JUSTGO/Enter to accept.

On the T270 Learn Programs cannot be deleted. They must be overwritten.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Bodyguard T270 Manuel d'instructions Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Tapis de course Bodyguard T270